| Author | Message | ||
     Anders Malmgren Rating: N/A |
I never thought that shutters woudl work on a DLP or LCD. But people on this page seeems to made it work so i tried to get my metabyte eyescream/H3d glasses to work with my Infocus X1. After reading around here I understood that i should set the resultion to the maximum resutlion the X1 could handle (1024x768) and not the native one (800x600). And the refresh rate shoudl be set to 60hz? I use eye3d activator 2.1 to activate my H3d/wicked3d glasses in Windows XP. ANd it seems to me that the activator 2.1 wont let me activate the glasses if I use refresh rates under 85hz. But if I use 85hz the glasses are activatet but everything is out of sync. This is the settings that i use to even get the glasses activatet, 1024x768, 85hz, interleaved viewing. These settings works fine on my CRT by the way. So what should i do to get the h3d/wicked3d eyescream to work on the X1? (cant wait to play my Car games with stereo 3d on my DLP!)  Thank in advance, Anders | ||
| Anders Malmgren Rating: N/A |
Anyone who can give me any tips? /A | ||
| Anonymous Rating: N/A |
Use native resolution (800x600) ... Use 60 Hz ... It should work ... | ||
| Anders Malmgren Rating: N/A |
Well it doesnt, does it work both with inerleaved and top/bottom? I havent managed top/bottom to work even on my CRT so i use interleaved. /Anders | ||
| bigbadbob Rating: N/A |
I just started to use my e-d glasses with my infocus x1. getting good stereo at 60hz. Flightsim 2002 looked fantastic. Set for page flipped. Contrast up on x1, looked brighter than computer screen. Started experimenting, went to e-d site downloaded latest drivers. disaster, been unable to run any 3d stuff all week! | ||
| Anonymous Rating: N/A |
Just dropping in to let you know you have an interesting site. I hope you'll continue to work on it. Wishing you all the best. | ||
| Anonymous Rating: N/A |
Hi - big thanks (great site!). |
