| Author | Message | ||
     bigdognick Rating: N/A |
I am looking for a software solution that will give me both perspectives on my monitor; as in having the left image on the odd lines and right image on the even lines, while running in interlace mode. All this without hardware. I do NOT want to use 3d glasses or be dependent on any purchased hardware; I have developed a even/odd field sequential splitter that will take the field sequential images and place them on two seperate LCD screens inside a head mounted display. However, I can not use any type of line blanking device nor a scan doubler. Does anyone know of a software solution to my situation, and if so, please email me at bigdognick@yahoo.com and if it works I will be happy to provide some compensation. I have bought edimensional's glasses thinking their software would work in interlace without the "pigtail" but I was mistaken. Quality is not the issue, nor is flicker. I have successfully used my HMD after the edimensional "pigtail" and it works fairly well, however this is for a college project and I cant use anyone elses hardware. I have even tried to make a scan-doubler by using a PLL for use with the over/under method from edimensional, but it doesnt seem to work.....at all. Thanks for your time! |
