| Author | Message | ||
     Kristian Rating: N/A |
I have a dell pc with windows XP sp2 and nvidia fx3400. My screen is a 2304x1024 with 256 pix overlap. Stereo signal is split in two, one for each side of the wall. When I press Start buttom in Windows and logoff I could see that the stereo signal is inverted? So the next time I login the stereo signal is inverted, and to solve it I could press Start- logoff again or - change swap l/r on the driver. Any one that could tell me why? An the best- how to fix it? | ||
| Kristian Rating: N/A |
Forgot to tell that I'm using latest driver, 7.1.89 | ||
| Kristian Rating: N/A |
and the card is set to horiz span., created 96Hz with 1280x1024 resolution before I made the span. In windows xp to be sure that I have a stereo signal all time, do I need to rund ex. stereographics blueline or what? | ||
| Anonymous Rating: N/A |
I abslutely do not undertand what are you doing ... If you use the nVidai stereo DirectX drivers (and you probably do, you can not use the OpenGL one with non-quadro), the you can not have overlap nor it can works in horiz. span mode ... | ||
| Kristian Rating: N/A |
I dont use the nvidia stereo drivers. ** I use Nvida driver (7.1.89) together with stereographics blueline | ||
| Anonymous Rating: N/A |
And how do you create the stereo view ? | ||
| kristian Rating: N/A |
I have four projectors, two on each side. on has left and other has right eye, I have stereo signal on both screens. In the beginning I had ok stereo on one side, and inverted signal on the other (its the same sigal, split with a t-coax). managed to get same stereo signal on both side. But when I press start - logoff signal gets inverted on both side, | ||
| Anonymous Rating: N/A |
You stil did not explaned how do you create the stereo signal and what type of projection (passive ? active ? ) are you doing ... | ||
| Anonymous Rating: N/A |
Maybe you have problem with determinin witch monitor is primary and witch secondary ? |
