| Author | Message | ||
     Enrico Rating: N/A |
Does anyone know how to connect an ASUS 3D glasses set to a Revelator VGA interface? Thanks, Enrico | ||
| Andreas Schulz Rating: N/A |
Have a look at the parallel/DIN3 port interfaces descriptions in the homebrew section ( http://www.stereo3d.com/homebrew.htm ). Note that the link to Tomi Engdahl's page has moved to http://www.epanorama.net/circuits/sega3d.html (Chris!) | ||
| Christoph Bungert (Admin) Rating: N/A |
Enrico, you mean you have the ASUS glasses only. No ASUS upgrade kit or ASUS deluxe board? The ASUS controller works for the Revelator driver, just the reverse-control is a bit tricky. You have to hit the Revelator on/off hotkey as long as you catch the right direction. If you start homebrewing I would suggest to build a complete VGA-interface, maybe even with sync-doubling, instead of an adaptor for the Revelator-cable. You'll gain much functionality this way. Christoph | ||
| Enrico Rating: N/A |
Yes, I need to use the ASUS glasses on a Elsa Gladiac. I've already taken a look to the homebrew section but I've not found a section describing how to attach them to a revelator interface... some more help?!? :-) thanks, Enrico | ||
| Andreas Schulz Rating: N/A |
Guess it's about time to strip down my old sync-doubler circuit (browse at http://members.nbci.com/a_r_schulz ) - hopefully I'll find some time on monday... |
