stereo3d.com webboard: I-visor 3D with driver nvidia stereo

I-visor 3D with driver nvidia stereo Log Out | Topics | Search
Moderators | Register | Edit Profile

stereo3d.com webboard » Support - report your problems with 3D-products here » I-visor 3D with driver nvidia stereo

« Previous Next »

Author

Message

franck

Rating: N/A
Votes: 0 (Vote!)

Posted on Friday, April 12, 2002 - 12:43 pm:

Hello,

Is it possible to use the i-visor 3D with the nvidia stereo driver ?
When I try to select PC FIELD (field sequential) on the i-visor and after PC Mode,the i-visor said "no signal".
I have the nvidia driver 23.11 install and it seems to run correctly.

Any helps ?

Thanks

Anonymous

Rating: N/A
Votes: 0 (Vote!)

Posted on Tuesday, April 16, 2002 - 4:37 pm:

The i-Visor 3D will work with the Nvidia drivers. However it is very refresh rate sensitive. Try setting your refresh rate no higher than 72Hz and see if that helps

franck

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, April 17, 2002 - 3:20 pm:

I have try 60, 72, 75 Hz
Nothing to do,the i-visor said "no signal"

Thanks

CybermindNL

Rating: N/A
Votes: 0 (Vote!)

Posted on Monday, April 22, 2002 - 8:43 am:

The I-visor 3D will work and is recommended for use with Nvidia drivers (see also your manual page 33). The refresh rates you mentioned are supported. It sounds to me like your screen resolution is higher than 800x600. You can check to see if it works by setting the 3D mode before starting your application. Whilst in the desktop mode set the I-visor first to 2D mode, change to PC Field and select PC Mode if you get "no signal" then your I-visor is more than likely not working properly.

If you need any extra help send a email to info@cybermind.nl we will be more than happy to help you to get your I-visor working.

Cybermind NL

Administration