| Author | Message | ||
     Maniac Rating: N/A |
Hi, after months I decieded to use my 3D-Revelator once again. In installed both NVidia 3.87 Graphics & Stereo Driver on my Windows XP System. But as soon as I look through the glasses I encountered heavy flickering through both LCD's (about 2 times per second), even if there is no 3D-Stereo Application running. Some would say it must be about the monitors DDC-signal, but the thing is I use the very same monitor, graphics card, motherboard, glasses like before and it has alwas worked flawlessly. However I installed some new hardware like an HDD, a TV-card, a new Soundblaster, but even if I disable those via the device manager, the error still occurs. Has somebody an idea what could cause the error? Thanks in advance. Maniac | ||
| KuDawg Rating: N/A |
I had the heavy flickering, and noticed I set the stereo to 16bit and fogot my desktop was still 32bit... My rev's still work good after 4 years, off and on use... Im not sure why with 3d off but could because off that also... Ku | ||
| Maniac Rating: N/A |
Thanks for the tip but this did not work for me. Even if I switch my Desktop and 3D-Stereo to 16 Bit the flackering pesists. My best guess is that it is an IRQ Problem with one of my new cards - although I have tried to disable them. Seems like I have to strip them out and give it a try... |
