| Author | Message | ||
     James Buttle Rating: N/A |
Hi, I am using nvidia stereo driver 56.72 and detonator 22.80. This has made the stereo image appear on screen in games etc ok. However the glasses themselves do not shut on and off. Is there a third driver I need to enable the actual hardware? If not what could be the problem? I am using Gladiac 920 (quadro based I think) and Revelator (not wireless). TYIA | ||
| David Sykes Rating: N/A |
NVidia state that the Detonator and stereo-driver versions should both be the same. | ||
| gogou Rating: N/A |
ok I maibe have a clue about it. Got a ti4200 with a pair of Elsa revelator and it wasn't able to shut till this morning :D What did I do ? ok I tell you but you can find it also on this forum. I've disable the pin number 12 on the vga connector. This pin is the pin for DDC1 (communication between the monitor and the graphique card. basicaly the monitor tell his setting to the graphique card to be able to use it in plug and play mode). The glasses use also that information bus to get the sync. So you have three solutions to do this. 1)Ccut directly the pin on the monitor connector (NOT THE GLASSES ONE) but you will lose the waranty DDC1 will not work anymore. 2) Install old 22.72 driver from nvidia, DDC1 wasn't implemented yet in that version but lol it doesn"t support 6800GT so it is not an option. 3) Built a VGA male to female adaptator without the pin 12. Harder but better  hope it can help | ||
| Anonymous Rating: N/A |
Great site guys, please let me know if you are interested in exchanging links with us. |
