| Author | Message | ||
     enme Rating: N/A |
hello i've fx5700, with n'vidia 71.84 and stereo 61.77. i've a new problem, with my infocus X2, when i use stereo with games, Stereo is reversed, to correct i must return my shutter glasses. When i use stereo movie player, it is not a problem, because i can reverse it with the program. Please, is someone have an idea to reverse stereo during game ?, i remember that older version about stereo drivers have this option, but now ...... Merci Eric | ||
| enme Rating: N/A |
i've re-installed stero and n'vidia driver 61.76 and the problems is alwaye the same !!!, inversed L/R when 3D active on my pc !!! Plesa can you help me ? because it is not easy to have returned glasses on my nose ! lol !... | ||
| 3d Rating: N/A |
The projector has a 1 frame delay... you need a little of eletronics to reverse the eyes views. | ||
| enme Rating: N/A |
Thanks, Then, why the problem is new? it is since one week only. Before by making CTRL T, one or twice, that the stereoscopy reversed !!! | ||
| pheggie Rating: N/A |
Is their a glasses type that you can pick that will reverse the stereo as a work around? | ||
| enme Rating: N/A |
sorry, i do not understand, what you say me ! Please can you explain ? Eric | ||
| Charles Rating: N/A |
Enme, pheggie is asking if any shutter glasses are available which have a built-in switch for reversing the L/R polarity. I think the answer is unfortunately "No." | ||
| Charles Rating: N/A |
Enme, let me correct my last statement. The NuVision company sells an IR emitter for its 60GX wireless shutter glasses which does have an L/R reverse switch on it. However, these glasses are rather expensive. Since your problem was not present when you first used the projector, I think you may be able to correct it without purchasing new hardware. I don't have the technical expertise to advise you on that, sorry... | ||
| pheggie Rating: N/A |
You might be able to use G3D Eyeswitcher http://shop.gali-3d.com/katalog_detail/katalog_detail.php?id=110 If your 3d dongle is vesa 3 pin minidin industry standard for 3d glasses | ||
| pheggie Rating: N/A |
If you want to reverse stereo for H3D wireless glasses The only thing you can do in hardware to reverse the eyes is change the LCD's on the glasses. You can do one of two things: Swap LCD connection H1 and H3 marked on the PCB. So H1 goes to the left LCD and H3 to the right. This would be tough because there isn't much room in the case for the wire run. or Swap pins 14 and 15 of U4. Lift the pins and wire pin 14 to the pad of 15 and 15 to the pad of 14. | ||
| enme Rating: N/A |
Thanks, I cut the cable and I have 3 wire : red, black and white, which one i must invert to reverse the 3d stereo ? Which one is H1 and H3 ? It's more easy than open the box. Regards Eric | ||
| pheggie Rating: N/A |
Oops cut wire is no go, one wire is +5V, one is ground and the other is a serial data line. So it is impossible to invert the 3d by swapping these wires around. It won't work because left and right are sent serially down the one single wire. The information I gave was for rewiring inside the wireless H3D glasses You'd have to disassemble the glasses which I've never done personally. I got the rewiring information from email from i-glasses.com So join up red to red white to white and black to black again. | ||
| pheggie Rating: N/A |
If you don't know how to rewire the glasses print out the instructions and take them to a TV technician and ask if he could rewire them for you for a fee or find a friend whose good with electronics and soldering. | ||
| pheggie Rating: N/A |
I'm pretty sure chip U14 is in the H3D glasses to decode the serial data. You don't need to open the box at all. All alterations are to be done in the glasses case. |
