| Author | Message | ||
     Anonymous Rating: N/A |
I have a pair of wicked3d eyescream glasses that I've had for quite a while. Anyway, I hadn't been using them lately so the sync doubler, emitter, and plug in power adapter got thrown into a closet and mixed up with several other similar plug in type power adapters. Also I don't seem to be able to locate any installation instructions or documents that may have enclosed with the glasses. So, now in order to use them again, I need to try and figure out exactly which power adapter is the correct one for the sync doubler. Anyone here who might have them care to tell me what the correct voltage and polarity is for the power adapter and also if there should be any particular markings on the power adapter that would help me distinguish it from the others? | ||
| Christoph Bungert (Admin) Rating: N/A |
Wicked3D eyescream (classic H3D) has the following power specs: 9V DC 200mA - (o + Christoph | ||
| Anonymous Rating: N/A |
Thank you very much! Using this information I have found the correct adapter. It's the one I thought it was, but I wanted to be sure I hadn't got it mixed up with a different one before I hooked it up. One again, I greatly appreciate your response. | ||
| Anonymous Rating: N/A |
Hello, I just wanted to say you have a very informative site which really made me think, Thanks ! A site with a wealth of info.!...thanks very much! Have a nice Day!! | ||
| Anonymous Rating: N/A |
a really great homepage! i'm a big fan of your stuff although i'm just 16! |
