| Author | Message | ||
     Jeroen Huylebroeck Rating: N/A |
I've got these brand new revelators, but I can't seem to get them to work, I connected everything, installed the nvidia 3d stereo drivers next to my detonator 22.50's to stear my Hercules 3d Prophet II GTS. It's no use, my revelator's do shut & open, but very unevenly, sometimes both at time, sometimes not, it goes crazy, no real metrum or anything. My monitor is set at 100 120 140 & 144 Hertz. All are the same. What is the problem here? Please help, I'm desperate. | ||
| Le Grand Duc Rating: N/A |
They r possibly broken ( it's common with new infra red version )... other possibility is that your screen DCC signal makes problems... | ||
| Jeroen Huylebroeck Rating: N/A |
how can they be broken? they are brand new | ||
| LeGrandDuc Rating: N/A |
shit happens had to replace my twice with Elsa to get a pair that workes more than two weeks | ||
| Jeroen Huylebroeck Rating: N/A |
--> screen DCC signal makes problems how can I check if it is this problem? | ||
| Le Grand Duc Rating: N/A |
read elsa's FAQ pages about the revelator about this problem... they have a solution there with using a pass through cable with pins cut... didn't help in my case maybe will in yours good luck | ||
| Jeroen Huylebroeck Rating: N/A |
what problem did you have? | ||
| A ndreas Schulz Rating: N/A |
Christoph, on this site has some hints for fixing Revelator problems, and you may also like to have a look at my Revelator troubleshooting page | ||
| Le Grand Duc Rating: N/A |
HI first both pairs worked fine but after very short time, one lens started to flicker randomly while other worked fine... as i told u had to replace 'em | ||
| Jeroen Huylebroeck Rating: N/A |
cut off the DDC-line: how to do that? Power supply for Revelator missing on your VGA-output: Is this the case with my Prophet II GTS? | ||
| Le Grand Duc Rating: N/A |
I don't think that the power is missing cause then u wouldn't see any flickering u have to buy a short screen cable extender, and cut off pins 12 and 15 if i remember correctly, then attach it between your screen and the black cable u've got with revelator. again, i think this is covered in the FAQ on elsa.com | ||
| AIG Rating: N/A |
You don't need to cut off pins 12 and 15, you may simply isolate them, with scotch for example. I've solved some other problems with DDC this way. | ||
| Anonymous Rating: N/A |
hey dude, I had your problem too. It is the pins in your monitor cable that are causing it. Do as was suggested above and get a short extention cable and break off pins 12 and 15(those sound right to me too), then put that extention between your video card and your monitor. The pins should be numbered in a 5/10/15 format. You just have to count them out. | ||
| Anonymous Rating: N/A |
Hello, a really interesting experience to visit your website. For sure i will come back soon. greets to all ! | ||
| Anonymous Rating: N/A |
Hi from New York And thanks for the web site. It was just the thing I had been looking for. It has helped me no end. Thanks again |
