| Author | Message | ||
     st0ne Rating: N/A |
Did someone manage to use Revelators with the new NVIDIA stereo drivers (28.32 or 30.87) ? I've tried a lot of configurations : - TNT card, and GeForce4 MX440 card (MSI) - W98, and W2000 - Drivers 23.11, 28.32 and 30.87 The TNT card works only with 23.11, both on W98 and W2000. The GF4 card didn't work in any config. When I start medical test, the glasses sometimes work, but loose synchronization after 1 second. After that they flick randomly. Same thing with nvidia stereo viewer... | ||
| Anonymous Rating: N/A |
Sounds like an IRQ conflict. The IRQ you use for the video card can ONLY be used for the video. | ||
| st0ne Rating: N/A |
There's no IRQ conflict... The video card is alone on its IRQ (I tried with IRQ9 and IRQ11). | ||
| st0ne Rating: N/A |
I changed my GF4 for a GF3 (Gainward TI200), and now it works fine with 23.11 ! But I still can't make it work with newer drivers... | ||
| helper Rating: N/A |
If the monitor flips but the glasses are dead Try turning on the glasses in a picture program using flip sync on in full mode then leaving the glasses on closing the pic program and setting up your game toggle on the monitor flip mode with the galsses still running, this will trigger the glasses to work once you close everything down and try again in the stereo tab test screen. | ||
| Anonymous Rating: N/A |
This is a one super duper site | ||
| Anonymous Rating: N/A |
I love this site, there is so much information to be found. Thank you. |
