| Author | Message | ||
     Michael Seidel Rating: N/A |
JVCs Website for a new polarizing adapter kit for D-ILA beamers. Maybe works on other LCD beamers too: http://www.jvcdig.com/3d_kits.htm Michael Seidel | ||
| Christoph Bungert (Admin) Rating: N/A |
The webpage says: "You will need 2 projectors to use in the stereographic mode." Unfortunately it's just a set of polarizers. It may work with LCD-projectors as long as the projectors don't emit polarized light by default. If both projectors are already polarized in the same direction it won't work. There are pairs of pre-polarized LCD-projectors available for 3D-projection. What I'm waiting for is a single, shutterglasses-compatible, high-refresh, non-ghosting projector or monitor. Christoph | ||
| Michael Seidel Rating: N/A |
the key of this adapter kit is not the polarizer but the lambda retarder plate, which rotates the direction of the polarized output of the lcd projector. Therefore it should be compatible at least to single chip lcd beamers. Michael |
